NSF 51 /61 High Density Polyethylene Tubing

PE 2100 HDPE Tubing

NSF 51 / 61 High Density Polyethylene plastic tubing is less flexible than LDPE, but has better physical and chemical properties, and withstands sterilization by boiling. NSF 51 /61 HDPE polypropylene tubing is widely used in transporting air, water and chemicals. High Density Polyethylene tubing is produced from raw materials which meet FDA requirements. High Density Polyethylene Tubing meeting NSF 51 and NSF 61 standards is also available on a custom order basis. For more information about the chemical resistance properties of NSF 51/61 high density polyethylene tubing , visit our plastic tubing specifying guide.

Colors:
Natural(semi-opague white)
Black(specific sizes) - The color black is good for improved durability in direct sunlight and outdoor exposure.

Coil Length:
100'

High Density Polyethylene tubing is available in cut pieces, special lengths and colors on custom basis.

For best results, use sleeved compression fittings with all thermoplastic tubing.

I.D.=Inside Diameter
O.D.=Outside Diameter

CLICK BLUE LINKS BELOW for a Rapid Response Quote.

NSF 51 / 61 PE 2100--High Density Polyethylene Tubing-- Natural & Black
Sizes			Working
I.D. Sizes	O.D. Sizes	Wall Thickness	PSI@73°F
1/8	1/4	1/16	456
.170	.250	.040	260
3/16	5/16	1/16	340
1/4	3/8	1/16	272
5/16	7/16	1/16	228
3/8	1/2	1/16	194
1/2	5/8	1/16	151
.600	.750	.075	152
5/8	3/4	1/16	123
3/4	7/8	1/16	105
3/4	1	1/8	195
.814	1	.093	140
7/8	1	1/16	90
1	1-1/4	1/8	152
1-1/4	1-1/2	1/8	124
1-1/2	1-3/4	1/8	105
1-3/4	2	1/8	91
2	2-14	1/8	80

ISO 9001:2000
Without Design

Certificate Number
95.160

Home : About Us : Request Quote : Send Drawing : Contact Us : Resources

Call: 800.687.2185
Fax: 330.653.6551