NSF 51 /61 High Density Polyethylene Tubing

PE 2100 HDPE Tubing

hdpeNSF 51 / 61 High Density Polyethylene (HDPE) plastic tubing is less flexible than LDPE, but has better physical and chemical properties, and withstands sterilization by boiling. NSF 51 /61 HDPE tubing is widely used in transporting air, water and chemicals. High Density Polyethylene tubing is produced from raw materials which meet FDA requirements. High Density Polyethylene tubing meeting NSF 51 and NSF 61 standards is also available on a custom order basis. For more information about the chemical resistance properties of NSF 51/61 high density polyethylene tubing , visit our plastic tubing specifying guide.

Colors:

  • Natural(semi-opaque white)
  • Black(specific sizes) – The color black is good for improved durability in direct sunlight and outdoor exposure.

Coil Length:

  • 100′

High Density Polyethylene tubing is available in cut pieces, special lengths and colors on custom basis.

For best results, use sleeved compression fittings with all thermoplastic tubing.

I.D.=Inside Diameter
O.D.=Outside Diameter

*=Available by custom quote only.

CLICK BLUE LINKS BELOW for a Rapid Response Quote.

NSF 51 / 61 PE 2100--High Density Polyethylene Tubing-- Natural & Black
SizesWorking
I.D. SizesO.D. SizesWall ThicknessPSI@73°F
1/8*1/4 1/16 456
.170.250.040260
3/16*5/161/16340
1/43/8 1/16272
5/16*7/161/16228
3/81/2 1/16 194
1/25/8 1/16 151
.600*.750.075152
5/8*3/4 1/16 123
3/4*7/8 1/16 105
3/41 1/8195
.8141 .093 140
7/8*1 1/16 90
11-1/4 1/8152
1-1/4*1-1/2 1/8124
1-1/2*1-3/4 1/8105
1-3/4*2 1/891
2*2-1/41/8 80