Polypropylene Tubing

(PP Plastic Tubing)

polyprDurable and heat resistant, this clarity grade polypropylene plastic tubing is ideal for the transfer of hot liquids or gases, or where higher temperatures and pressures are expected. Normally recommended for vacuum systems, polypropylene plastic tubing also has excellent resistance to acids and alkalies, but poor resistance to aromatic, aliphatic and chlorinated solvents. Polypropylene tubing from Hudson Extrusions is manufactured from raw materials meeting FDA requirements. NSF 51 polypropylene plastic tubing is also available. For more information about the chemical resistance properties of polypropylene tubing, visit our plastic tubing specifying guide.

Polypropylene Plastic Tubing Color:

  • Natural (semi-opaque white)
  • Black available for I.D. sizes 1/8, .170, 1/4, 3/8 – The color black is good    for improved durability in direct sunlight and outdoor exposure.

Coil Length:

  • 100′

Polypropylene plastic tubing is available in cut pieces, special lengths, and colors on custom basis.

For best results, use sleeved compression fittings with all thermoplastic tubing.

I.D.=Inside Diameter
O.D.=Outside Diameter

*=Available by custom quote only.

CLICK BLUE LINKS BELOW for a Rapid Response Quote.

Polypropylene Tubing--PP
SizesWorking
I.D. SizesO.D. SizesWall ThicknessPSI@73°F
1/81/41/16272
.170.250.040149
3/165/161/16196
1/43/81/16157
3/81/21/16112
1/25/81/1687
.600.750.07587
5/83/41/1671
3/411/8110
.8141.09380
11-1/41/887
1-1/41-1/21/871
1-1/2*1-3/41/860